SAAB WIS ONLINE

ACC control module

ACC control module


To remove


1. Remove the two outer buttons below the ACC panel (A).

2. Press out the ACC control module from behind (B).


3. Unplug the connector (C).


To fit


1. Plug in the ACC control module connector.


2. Fit the control module in place.

3. Fit the two buttons back in place below the ACC panel.


4. Calibrate the ACC system by pressing the "AUTO" and "OFF" buttons simultaneously.

Important

On initiating calibration, all previous trouble codes will be cleared. Before starting calibration, a readout must be obtained of all trouble codes stored in the memory.