SAAB WIS ONLINE

Blended-air sensor

Blended-air sensor


To remove


1. Remove the glove box.

2. Remove the panel from the side of the centre console.

3. Remove the air duct on the floor.

4. Unhook the blended-air sensor and withdraw it.


5. Unplug the connector and press the sensor's leads out of it.


To fit



1. Press the leads into the connector and plug it in.

2. Fit the mixed-air sensor in the climate control unit. Make sure that it snaps into place.

3. Refit the floor air duct.


4. Refit the panel on the side of the centre console.

5. Refit the glove box.

6. Calibrate the ACC system by pressing the "AUTO" and "OFF" buttons simultaneously.

Important

On initiating calibration, all previous trouble codes will be cleared. Before starting calibration, a readout must be obtained of all trouble codes stored in the memory.