Bonnet

Bonnet

To remove

Note
Operations 3, 4 and 5 will be easier if performed by two people, which is the recommended procedure.

Open the bonnet.

Important
Protect the paintwork at the rear edge of the bonnet from damage.

Disconnect the hose for the washer nozzles from the nipple on the cover panel over the space between the bulkhead partitions.

Mark the position of the bonnet and remove it from the hinges (2 persons).

Detach the gas springs from their fastening points on the bonnet (2 persons). The springs are mounted on a ball pin and secured with a clip.

Lift off the bonnet (2 persons).

To fit

Fit the bonnet in reverse order.

Note
When replacing the bonnet: Remove the front seal and sound insulation (using a pair of curved needle-nose pliers) from the bonnet to be replaced and fit them on the new bonnet.