Replacement of door handle, rear doors
|
|
Replacement of door handle, rear doors
|
|
2.
|
Remove the door trim. See Service Manual 8:2 "Interior
equipment"
.
|
|
3.
|
Remove the water barrier.
|
|
4.
|
Detach the pull bar (between the door handle and door lock) from the
door side and let it hang down.
|
|
5.
|
Remove the trim panel.
|
Note
|
|
First undo the rear edge.
|
|
|
6.
|
Remove the internal sealing moulding.
|
|
7.
|
Remove the guide channel retaining screw.
|
|
8.
|
Pull the sealing moulding up out of the guide channel.
|
|
9.
|
Angle the guide channel up out of the window frame.
|
|
11.
|
Remove the door handle retaining nut and plate from the rear of the
handle.
|
|
12.
|
It may be necessary to remove the lock (three screws).
|
|
13.
|
Detach the pull bar (between outside door handle and lock) from the
lock.
|
|
14.
|
Angle the door handle out of the door.
|
Fit in reverse order.
|
Note
|
|
Smear the sealing moulding with a little petroleum jelly (Vaseline)
to facilitate fitting it.
|
