SAAB WIS ONLINE

Upholstery, backrest

Upholstery, backrest

To remove



1. Remove the seat, .

2. Loosen the rear edge of the cowl.

3. Remove the head restraint, .

4. Remove the head restraint locating sleeves, .

5. Cut the staples securing the lower edge of the upholstery.

6. Prise open the metal tabs to release the rods tensioning the upholstery at the front.

7. Pull off the upholstery and cut the rest of the staples.

8. Pull off the seat upholstery.


To fit



1. Pull on the upholstery to the first wire rod.

2. Fit the head restraint locating sleeves, .

3. Fit the staples securing the upholstery to the foam padding, using the tool supplied with assembly kit, .

4. Press out the padding so that it fills the upholstery.

5. Hook the rods into place and secure them by means of the metal tabs.

6. Fix the lower edge of the upholstery by means of staples.

7. Fit the head restraint, .

8. Secure the rear edge of the cowl.

9. Fit the seat, .