Evaporative emission canister
|
|
Evaporative emission canister
|
|
1.
|
Raise the car.
|
|
2.
|
Detach the purge line and the shut-off valve hose from the evaporative emission canister.
|
|
3.
|
Detach the line from the fuel tank to the evaporative emission canister.
|
|
|
3.a.
|
Press the connection inwards towards the evaporative emission canister in the direction of the connection.
|
|
|
3.b.
|
Compress the ring so that the catches are bent upwards.
|
|
|
3.c.
|
Release the connection by detaching it from the connector pipe on the evaporative emission canister.
|
|
4.
|
Undo the screw and remove the evaporative emission canister.
|
|
1.
|
Position and fit the evaporative emission canister, making sure it hooks correctly onto the holder.
|
|
2.
|
Connect the shut-off valve hose to the evaporative emission canister.
|
|
3.
|
Connect the line from the fuel tank and then the line to the EVAP canister purge valve.
|
|
4.
|
Lower the car to the floor.
|
