SAAB WIS ONLINE

Solenoid valve, EVAP shut-off - B204L only

Solenoid valve, EVAP shut-off - B204L only

To remove


1. Raise the car.


2. Detach the shut-off valve hose from the evaporative emission canister.

3. Lower the car slightly.

4. Clean and remove the white cover over the shut-off valve.

5. Unplug the connector and lift the valve upwards.


6. Detach the valve's hose connection.

7. Remove the valve.


To fit



1. Connect the valve to the hose. Make sure the opening for the cable is positioned correctly.

2. Spray with Kontakt 61 and plug in the connector.

3. Carefully lower the valve into the vent pipe.

Important

Be careful with the foam rubber filter so that it is not damaged or incorrectly positioned.


4. Fit the cover.


5. Raise the car.

6. Adjust and connect the shut-off valve hose to the evaporative emission canister.

7. Lower the car to the floor.