Secondary air injection, control valve
| Secondary air injection, control valve |
| To remove |
| 1. |
Lift up the sealing strip on the
top of the bulkhead
partition.
|
|
| 2. |
Undo the retaining clip and lift up the valve unit.
|
|
| 3. |
Unplug the connector and disconnect the two hoses.
|
|
| 4. |
Remove the valve.
|
|
| To fit |
Fit in reverse order.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
