Throttle position sensor
Throttle position sensor |
To remove |
1. |
Remove the two engine
covers.
|
2. |
Remove the rubber duct in front of the throttle body.
|
3. |
Disconnect the crankcase breather hose.
|
4. |
Unplug the connector, undo the two retaining screws and remove the
sensor. Note the position of the O-ring.
|
To fit |
1. |
Make sure that the O-ring is
correctly positioned and fit the sensor
onto the throttle spindle.
|
2. |
Plug in the connector and the crankcase breather hose.
|
3. |
Fit the rubber duct.
|