SAAB WIS ONLINE

Rear heated oxygen sensor (2) (after threeway catalytic converter)

Rear heated oxygen sensor (2) (after three way catalytic converter)

To remove



1. Remove the resonating chamber.

2. Unplug the sensor wiring connector.


3. Before removing the wiring, note how it is run and the positions of any cable ties.

4. Raise the car and remove the oxygen sensor.


To fit



Important

Before fitting, lubricate the threads with Molycote 1000 or the equivalent.


Fit in reverse order.

Tightening torque 55 Nm (33 lbf ft)