Throttle valve adjustment
| Throttle valve adjustment |
| To adjust |
| 1. |
Remove the resonating
chamber.
|
|
| 2. |
Check the setting of the throttle valve by measuring the distance to the valve.
This distance should be the same on both sides of the valve. Use a sliding
caliper.
|
|
| 3. |
If necessary, adjustment can be carried out by undoing the 2 screws and then
moving the bracket in the desired direction.
|
|
| 4. |
Refit the resonating chamber.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
