Secondary air injection system
| Secondary air injection system |
The secondary air injection system consists of an air injection pump which blows air into the exhaust manifold via a vacuum-controlled secondary air injection control valve (325) in the hose between the air injection pump and exhaust manifold. This valve obtains its control vacuum from the intake manifold.
The secondary air injection pump relay (324) is supplied with current (+30 circuit) when the control valve (584) relay is grounded via pin 19 of the control module.
The control valve relay is supplied with current (+15 circuit) via fuse 19.
The process is activated for 55 seconds or until the temperature of the coolant attains 40°C (104°F). To compensate for the higher power output from the generator, the control module increases the flow of air through the idle air control valve just before the process is activated.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
