Command menu "OBTAINREADOUTS"
| Command menu "OBTAIN READOUTS" | 
|  | ISAT display | Function | 
| 1 | BATTERY VOLTAGE XX.X
V | Shows control module's supply voltage | 
| 2 | ENGINE RPM XXXX rpm | Engine rpm (shows 450 rpm as lowest speed) | 
| 3 | WHEEL SPEED FL XXX
km/h | Wheel speed FL (shows 3 km/h as lowest speed) | 
| 4 | WHEEL SPEED FR XXX
km/h | Wheel speed FR (shows 3 km/h as lowest speed) | 
| 5 | WHEEL SPEED RL km/h | Wheel speed RL (shows 3 km/h as lowest speed) | 
| 6 | WHEEL SPEED RR XXX
km/h | Wheel speed RR (shows 3 km/h as lowest speed) | 
| 7 | TCS THROTTLE POS XX %% | This figure is the pulse ratio of the TCS throttle
butterfly position signal from the TCS control module to the TCM control module (9-92%%) | 
| 8 | MAIN THROTTLE POS XX %% | This figure is the pulse ratio of the main throttle
butterfly position signal from the MOTRONIC control module to the TCS control module (9-
92%%) | 
| 9 | BRAKE LIGHT SWITCH
ON/OFF | Shows status of brake light switch | 
| 10 | TCS SWITCH ACTIVE/NOT
ACTIVE | Shows status of TCS switich ("ACTIVE" only when
the switch is pressed continuously) | 
| 11 | TCS OFF LAMP ON/OUT | Shows whether the TCS control module turns on the
TCS OFF lamp | 
| 12 | DISENG CRUISE CONT
ON/OFF | Shows whether the TCS control module disengages
the Cruise Control system | 
| 13 | TCS LAMP ON/OUT | Shows whether the TCS control module turns on the
TCS lamp and whether the TCS control module activates the TCS function in the TCM control
module | 
| 14 | DISCONN ENRICHMENT ON/OFF | Shows whether the TCS control module sends the "disconnect
full-load enrichment" signal to the MOTRONIC control module (the ISAT display alternates
between ON and OFF when the function is activated) | 

 
		