Front heated oxygen sensor (oxygensensor 1)
|
|
Front heated oxygen sensor (oxygen
sensor 1)
|
|
1.
|
Take off the engine
cover.
|
|
2.
|
Remove the turbo's pressure pipe.
|
|
3.
|
Unplug the sensor wiring connector.
|
|
4.
|
Note how the wiring is run and the positions of the clips/cable ties before
removing the wiring.
|
|
5.
|
Raise the car and remove the oxygen sensor.
|
|
Important
|
|
Before fitting, lubricate the threads of the oxygen sensor with Molycote 1000 or the
equivalent.
|
|
|
Fit in reverse order.
Tightening torque 55 Nm (40 lbf
ft)
|
Important
|
|
Take care when securing the wiring to prevent it from coming into contact with the
exhaust pipe/turbo unit.
|
|
|
