SHIFT UP lamp (cars with manual gearbox)
| SHIFT UP lamp (cars with manual gearbox) |
The lamp is situated in the main instrument display panel and supplied with current from the +15 circuit. It is controlled from pin 55 of the engine control module and tested for 3 seconds when the ignition is switched on.
A combination of light engine load and high engine revs when the car is being driven will cause the lamp to light up. This does not apply to 5th gear. The lamp lights up regardless of engine load when engine speed approaches 6000 rpm.
The ECM calculates the gear position on the basis of engine speed and vehicle speed.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
