Programming the ICE module
| Programming the ICE module |
|
-------------------------------------------
> ICE ------------------------------------------- ------------------------------------------- |
||
|
l
ON/ENTER l V |
||
|
ACTIVATE RELAY
ACT. INSTR. FUNCT ACT OTHER FUNCT >PROGRAMMING |
||
|
l
ON/ENTER l V |
When an ICE control module is changed, the new control module will have to be programmed with a number of parameters. This is accomplished with the scan tool. To understand the function of these parameters, see "Technical description".
The following parameters must be programmed:
|
Parameter
|
Choice of function
|
Description
|
Market
|
|
Audible key warning
|
WITH WITHOUT
|
|
US, CA Other markets
|
|
Daylight driving lights
|
ALT1 ALT2 ALT3
|
|
Other markets SE CA
|
|
Brake test message
|
WITH WITHOUT
|
|
D (legal requirement) Other markets
|
|
FOG LIGHT VARIANT
|
ALT1 ALT2 ALT3
|
|
Other markets US, CA
|
|
FAN VARIANT
|
SINGLE STEP 160-250W TWO STEP 330W
|
|
|
|
HI POS BRAKE LIGHT
|
WITH WITHOUT
|
HIGH-L.BRAKE LIGHT
|
|
|
Parked position
|
ON/OFF
|
All M1995 cars have a parking switch incorporated in the windscreen wiper motor.
|
|
|
REAR WINDOW HEATER
|
6, 9, 12, 15, 18, 21, 24 MIN
|
Adjustment of the electrically heated rear window's activation time
|
|
|
ENGINE ALTERNATIVE
|
B258 B206-B234 B204L
|
6-cyl. 4-cyl. injection 4-cyl. Turbo
|
|
|
EXTRA WIPER SWEEP
|
ON/OFF
|
WHEN WASHING
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
