Interior lighting, front reading lamps
|
Interior lighting, front reading lamps
|
1.
|
In the event of a fault in any individual lamp, check the fuse and the bulb.
|
2.
|
Unplug the switch from the interior lighting connector and ground pins 1 and 3.
|
3.
|
If the lamps do not light up, check the wiring for breaks/shorting between the fuse and the lamps, and also between the lamps and the switch.
|
4.
|
Connect a jumper lead between pins 4 and 1 of the switch connector and also between pins 5 and 3. If the lamps light up, change the switch.
|
5.
|
Check the wiring for breaks/shorting between pin 4 of the switch connector and pin 23 of the ICE module, and also between pin 5 of the switch connector and pin 46 of the ICE module.
|