Power supply and grounding
|
Power supply and grounding
|
1.
|
Plug in the scan tool and select "READ FAULT CODES" from the menu. If any trouble codes are present, continue on
.
|
2.
|
If no trouble codes are present, check the battery voltage by means of the scan tool.
|
3.
|
Connect a BOB and check the leads for breaks/shorting as follows:
|
|
•
|
between pin 47 of the ICE module and the fuse holder for fuse 35.
|
|
•
|
between pin 41 of the ICE module and the fuse holder for fuse 21.
|
|
•
|
between pin 34 of the ICE module and the fuse holder for fuse 17.
|
|
•
|
between pin 65 of the ICE module and pin B of the ignition switch.
|