SAAB WIS ONLINE

Programming

Programming

Starting with M1995, the Scan Tool is equipped for programming SID 2/3 and SID 4 (SID 1 with audio display). Only one basic programming routine is provided and since the Scan Tool does not show how the instrument is programmed, the routine cannot therefore be used to check this. Basic setting of the following features is carried out and they must be adapted to the relevant market by means of the adjustment commands.


Service indicator The normal service interval is 20,000 km. This can be programmed and changed with "SERVICE INDICATOR" in the "ADJUSTMENT" menu.

Language The basic setting (English) can be changed with "LANGUAGE" in the "ADJUSTMENT" menu.

Units The basic setting (metric) can be changed by means of the SID unit's pushbuttons.

Speed warning ME This speed warning feature is inactive in the basic setting. It is activated by "SPEED WARNING ME" in the "ADJUSTMENT" menu.

Important

It is advisable before programming is started to make a note of the current equipment of the SID version (Sensonic, TSAS or standard). These details are required in connection with programming.




1. Select PROGRAMMING in the Scan Tools SAAB INFO DISPLAY program.

2. Continue to the programming phase or terminate.

3. State the SID type concerned. May be SID 2, 3 or 4 (SID 4 = SID 1 with audio display).

4. State equipment, which may be ACS (Sensonic), HOOD (TSAS), ACS/HOOD or NORMAL

5. Program the instrument with the entered details.

Important

Both commands result in programming of the instrument. Will be corrected for M1996.


6. This menu confirms that programming has been carried out.

7. This menu is displayed if programming has been interrupted with ESC.


SCAN TOOL DISPLAY 1

SAAB INFO DISPLAY
ADJUSTMENT

=>PROGRAMMING

READ SYSTEM INFO

1. Select PROGRAMMING in the Scan Tool's SAAB INFO DISPLAY program.

SCAN TOOL DISPLAY 2

PROGRAMMING OF A

NEW SID UNIT

F1=CONTINUE

ESC=END

2. Continue to the programming phase or terminate.

SCAN TOOL DISPLAY 3

SELECT TYPE OF

SID UNIT

SID 2/3

SELECT

3. State the SID type in question, which may be SID 2/3 or SID

4. (SID 4 = SID 1 with audio display).

SCAN TOOL DISPLAY 4

SELECT EQUIPMENT



XXX

SELECT

4. State equipment, which may be ACS (Sensonic), HOOD (TSAS), ACS/HOOD or NORMAL

SCAN TOOL DISPLAY 5

PROGRAMMING

WILL NOW OCCUR !!

5. Program the instrument with the entered details.



SCAN TOOL DISPLAY 6

PROGRAMMING CARRIED OUT

6. This menu confirms that programming has been carried out.

SCAN TOOL DISPLAY 7

PROGRAMMING INTERRUPTED

7. This menu is displayed if programming has been interrupted with ESC.