Reversing lights
| Reversing lights |
The reversing lights are switched on when reverse gear is engaged and the ignition switch is in the Drive position.
| 1. |
Check that fuses 9 and 31 are
intact and supplied with current.
|
|
| 2. |
Check that current is present on the connections of the reversing lights switch.
|
|
| 3. |
Check that the light bulbs are OK and supplied with current.
|
|
| 4. |
Check the connectors, wiring harness and ground connections.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
