Replacement of lamp bulbs and conductive foil
|
Replacement of lamp bulbs and conductive foil
|
1.
|
Turn the bulb socket and lift out the bulb.
|
Replacement of conductive foil
|
1.
|
Remove all the bulb sockets and be careful to make a note of where the
GREY
one was fitted.
|
2.
|
Remove the 3 steel screws and the 7 brass screws.
|
3.
|
Carefully lift off the conductive foil.
|
4.
|
Fit the conductive foil carefully on the rear unit and refit the bulbs in their right places.
NOTE: Make sure that the screws are fitted in the correct places.
Take care to fit the
GREY
bulb socket in its correct place.
|