SAAB WIS ONLINE

Alarm signal, country-specific/user alternative/siren

Alarm signal, country-specific/user alternative/siren

The theft alarm is pre-programmed for the requirements of 4 different countries on how an alarm is given. The operation thus fulfills the laws and insurance requirements that apply in these countries. For countries with other requirements, and for different customer requirements, individual programming is available under "OWN ALTERNATIVE" in the menu.

PROGRAMMING


1. Connect an ISAT scan tool. Select "PROGRAMMING".

2. Select "COUNTRY CODE".

3. Select country.

The values that apply for each country are given in the table on the right. For "OWN ALTERNATIVE" or "SIREN", see the description on the next page.


Country-specific



Country

Sound time

Flash time

Germany

30 sec.(*

5 min

Great Britain

30 sec.(*

does not flash

Switzerland

30 sec.(**

does not flash

OWN ALTERNATIVE





Holland

30 sec.(**

5 min

Siren







*) Sound reproduced at intervals.

**) Sound reproduced continuously.

Own alternative




1. Select "COUNTRY CODE". Select "OWN ALTERNATIVE".

2. Select desired values for alarm signal (sound and/or direction indicators) according to table below.

Sound time: 0-30-60-90-120-180-240-300 sec

Acoustic frequency: 0-0.5-1-2 signals/sec.

Flash time: 0-60-120-180-240-300 sec

Flash frequency: 0-0.5-1-2-4 signals/sec.


Siren

If a siren with battery back-up is fitted, this must be selected in the country code menu. The "SIREN" command, last in the programming menu, must also be selected "ON".

Continue with “Programming of the siren”.

Important

The alarm horn must be disconnected when a siren with battery back-up is fitted.