SAAB WIS ONLINE

SELF-ARMING

SELF-ARMING

The anti-theft alarm can be programmed for self-arming. This means that the alarm automatically starts monitoring without the remote control being used. There are two types of self-arming and for both of them the time before the function becomes active should be specified. The activation time should also be selected. The activation time is the time the 3-circuit breaking function is active when the alarm has been triggered.

When the alarm is set off, the selected country code will apply. The LED will start its delay period according to the specified "TIME BEFORE ACTIV." and then go over to indicating that the alarm is armed.

PROGRAMMING

SELF-ARMING

Connect the ISAT scan tool.

Select "PROGRAMMING"

Select "SELF-ARMING" and then:


1. "OFF" in order to deselect self-arming.

2. "WHEN +15 OFF" to select self-arming function on when ignition is "OFF".

3. "+15 OFF, DOOR CLOSED" to select self-arming on when ignition "OFF" and driver's door closed.


Time before self-arming




1. Select "TIME BEFORE ACTIV.".

2. Select time: 30, 60, 120, 180, 300 or 600 seconds as the time before the alarm self-arms.


Arming time

Select "ACTIVATION TIME": 30, 45 or 60 minutes.

Important

When self-arming has been selected, "self-immobilizing", or the so-called 3 circuit breaking will also be automatically included in the arming.