Remote control, rubber button as spare part
|
SERVICE INFORMATION
|
|
Bulletin Nbr:
|
383-1972
|
|
Date:
...........
|
April 1998
|
|
Market:
|
US, CA
|
|
|
Remote control, rubber button as spare part
|
Saab 900 M95-, with remote controlled anti-theft alarm.
The rubber button in the remote control will become worn after a time and is now available as a spare part for remote control with part number 45 50 075, 45 50 083 and 45 50 091 (CA: 30557482, 30558206 and 30557483).
Remote control with other part numbers must be replaced as the buttons are not replaceable.
50 40 274 Rubber button (CA: 30574978)
|
1.
|
Open the battery cover and carefully remove the two batteries.
|
Important
|
|
Be careful not to touch the contact surfaces on the batteries as this may cause interruptions in operation.
|
|
|
|
|
2.
|
Place a small screwdriver in the notch on the remote control and carefully pry apart the two halves.
|
Important
|
|
Be careful not to press the screwdriver into the remote control, as this will damage the circuit board.
|
|
|
|
|
3.
|
Detach the rubber button from the upper half with a small screwdriver.
|
|
4.
|
Fit the new rubber button. Make sure the button symbols are in the correct positions.
Poke down the rubber with a small screwdriver. Check the front of the remote control to make sure it is correctly fitted.
|
|
5.
|
Put together the two halves.
|
Important
|
|
Take great care of the circuit board when fitting together the two halves.
|
|
|
|
|
6.
|
Put back the batteries and close the cover.
|
Important
|
|
Be careful not to touch the contact surfaces on the batteries as this may cause interruptions in operation.
|
|
|
|
|
7.
|
Synchronize the remote control to the car by pressing the left-hand button five times.
|
|
Warranty/Time Information
|
Failed Object: 38396
Fault/Reason code: 33
Location code (US): 9
Warranty type (US): 01
Repair/Action code: 01
Labor Operation (US): 38396
Straight time: 0.2 hours
(CA: B4270 0.2 hrs.)
