SAAB WIS ONLINE

Command menu “READ VALUES”

Command menu “READ VALUES”

ISAT scan tool command

Function

ISAT Scan Tool display

LAST ALARM CAUSE

Displays the last 9 causes of alarm. Their are 6 possible alarm causes:

1. Tailgate

2. Hood

3. Pictogram Switch

4. Passenger door

5. Glass breakage sensor

6. Ignition



The ISAT scan tool display will be cleared if the

"CLEAR FAULT CODES" command is entered.





1. TAILGATE

2. BONNET

3. PICTOGRAM SWITCH

4. PASSENGER DOOR

5. GLASS BREAK SENSOR

6. IGNITION

9. ----

LOCK SIGNAL

Shows "ACTIVE" when the door receives a lock signal, otherwise shows "NOT ACTIVE".

ACTIVE

NOT ACTIVE

UNLOCK SIGNAL

Shows "ACTIVE" when the door receives an unlock signal, otherwise shows "NOT ACTIVE".

ACTIVE

NOT ACTIVE

PICTOGRAM SWITCH

Shows whether driver's door is open or closed. Shows pictogram switch status.

OPEN

CLOSED

IGNITION +15

Shows if the ignition is on or off.

ON

OFF

TAILGATE SWITCH

Shows if the tailgate is open or closed.

OPEN

CLOSED

BONNET

Shows if the hood is open or closed.

OPEN

CLOSED

DOORS

Shows if any of the passenger doors is open or closed.

OPEN

CLOSED

GLASS BRK SENS BUT

Shows if the button has disconnected the glass breakage sensor.

ON

OFF

+30

Shows the condition of the battery.

"LOW" = less than 9 V

"OK" = more than 9 V

ON

OFF

GLASS BREAK SENSOR

Shows the value from the glass break sensor.

0 - 255

CONTROL

Shows which button has been pressed on the remote control. Also functions on a remote control that has not been programmed.

NO BUTTON

LH BUTTON

RH BUTTON

ALARM CODE

Shows the status of the alarm code generated by the engine management system.

CORRECT

FAULTY

ABSENT