LED
LED |
As a test function for the theft alarm, there is an LED mounted in the dashboard. This is controlled by the control module (pin 2) and flashes (with varying frequency) or lights continuously depending on the different conditions. Some normal cases are shown on the table on the next page.
Self diagnostics
A self diagnosis is carried out during the delay period (10 sec.) each time the alarm is armed and the LED will go on continuously. If a fault is detected, a DTC will be stored in the control module and the LED will flash at a rate of 1 flash/second. Other alarm functions are not affected.
Function
|
LED
|
Time
|
Flash frequency
|
Arming
|
lit continuously
|
10 sec (delay period)
|
|
alarm, armed
|
flashes
|
|
1 flash/2 sec
|
Door, tailgate or hood open when arming takes place.
|
flashes
|
10 sec
|
1 flash/sec
|
Door, tailgate or hood open during delay period.
|
lit continuously - flashing
|
10 sec
|
1 flash/sec
|
Door, tailgate or hood closed during delay period.
|
flashes - lit continuously
|
10 sec
|
|
Tailgate closed after delay period.
|
flashes - lit continuously
|
10 sec
|
|
Tailgate opened after delay period.
|
flashes
|
|
1 flash/2 sec
|
Disconnection of glass breakage sensor (button)
|
flashes
|
10 sec
|
1 flash/sec
|
Self-arming, 3-circuit breaking (Anti-theft alarm)
|
flashes
|
|
double flash/2 sec
|
Self-arming, theft alarm
|
flashes
|
|
1 flash/2 sec
|
Self-immobilizing (Anti-theft alarm with VSS)
|
flashes
|
|
double flash/sec
|
Disarmed alarm
|
lit continuously
|
1 sec
|
|
Fault in system
|
flashes
|
during delay period
|
1 flash/sec
|