SAAB WIS ONLINE

Replacement of rear window washerhose

Replacement of rear window washer hose


To remove


1. Remove the screws securing the speaker grille and luggage compartment side trim as well as the C-pillar trim.

2. Detach the soft hose from the hard hose.

3. Turn the washer nozzle on the tailgate a quarter- turn to remove it.

4. Remove the hose from the clips on the C pillar.


5. Remove the rubber grommet in the tailgate and withdraw the hose.


To fit



1. Start by running the hose from the luggage compartment out to the tailgate.

2. Insert the hose through the rear roof mounting and then out through the rubber grommet.

3. Insert the hose into the tailgate.

Use a pair of long-nose pliers to withdraw the hose and then fit it onto the nozzle.

4. Make sure the hose is run neatly and evenly up to the tailgate without any tautness.


5. Fit the hose in the clips on the C pillar.

Then fit in reverse order.