Replacement of windscreen washer hoses
|
Replacement of windscreen washer hoses
|
1.
|
Open the bonnet and
disconnect the washer hose from the protective
cover over the space between the bulkhead partitions.
|
2.
|
Detach the hose from the nozzles on the bonnet and withdraw the
hose and rubber bushes from the bonnet.
|
3.
|
Remove the rubber sealing strip from the protective cover.
|
4.
|
Remove the clip for the protective cover over the space between the
bulkhead partitions. Raise the cover slightly and detach the washer hose
from the underside.
|
5.
|
Pull the hose through the partition and disconnect it from the T-piece
behind the battery.
Fit i reverse order.
|