Power supply +15

/ 900 / 1998 / 3. Electrical system / Wiring harnesses / Technical description / Power supply +15

Description of operation

Positive voltage is fed from the battery to the ignition switch via Maxi fuse 3 and crimp J1.

When the ignition switch is turned to ON or START, contacts 30 and 15 in the ignition switch will be connected together.

+15 voltage is then fed to:

•	via crimp J25 to fuse board 22a

-

fuses 17, 18, 19 and 37

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.