Cleaning the cooling circuit
|
Cleaning the cooling circuit
|
Connect flushing equipment 87 91 824 to the cooling circuit in such a way that the fluid flows through the circuit in the reverse direction.
Important
Important
|
Always wear protective gloves. Incorrect connection may cause damage to the transmission since the fluid filter incorporates a non-return valve which will prevent the fluid from circulating in the transmission. Furthermore, the fluid cooler will not be cleaned if the equipment is not connected correctly.
|
|
1.
|
Oil the sealing surface of the adapter plate with DEXRON II and fit a new fluid filter.
|
2.
|
Connect one of the hoses in the kit to the outlet on the bottom of the adapter plate (opposite side to the fluid filter).
|
3.
|
Raise the car and remove the left-hand air deflector.
|
4.
|
Disconnect the delivery hose from the transmission's lower outlet and connect it to the outlet on the side of the adapter plate (inlet).
|
5.
|
Disconnect the return hose from the transmission's upper outlet and connect the hose fitted to the bottom of the adapter to the transmission's upper outlet.
|
6.
|
Connect the return hose from the fluid cooler to the remaining hose in the kit and connect it to the lower outlet on the transmission.
|
7.
|
Fill the transmission with fluid, start the engine and check the connections for leakage.
|
8.
|
Apply the handbrake and depress the brake pedal.
|
9.
|
Move the selector lever to position D and run the cleaning process for 5 minutes.
|
10.
|
Disconnect the hose from the lower outlet on the transmission and separate the fluid cooler hose from the cleaning kit hose.
|
11.
|
Disconnect the cleaning kit hose from the transmission's upper outlet and connect the return hose from the fluid cooler to it instead.
|
12.
|
Disconnect the delivery hose from the outlet on the side of the adapter plate (inlet) and connect it to the transmission's lower outlet.
|
13.
|
Make sure that the hoses do not rest against the subframe. Fit the air deflector and lower the car to the floor.
|
14.
|
Check the engine oil level and transmission fluid level and top up as necessary.
|