Kick-down switch, replacement
|
|
Kick-down switch, replacement
|
|
1.
|
Remove the left-hand side section of the centre console.
|
|
3.
|
Gently work out the switch and pull it straight up (it is pressed in place on a sheet metal bracket).
|
|
4.
|
Unplug the electrical connector.
|
|
1.
|
Plug in the kick-down switch press it into place on the sheet metal bracket.
Important
|
Important
|
|
It is important to make sure that the switch is pressed firmly into place on reassembly as the kick-down function will otherwise be activated when the accelerator is in the wrong position. Apply a little silicone spray to facilitate fitting.
|
|
|
|
|
2.
|
Fit the carpet back in place.
|
|
3.
|
Fit the side section back in place.
|
|
4.
|
Check/adjust the kickdown function, see
.
|
