Ignition lock and ignition lock switch
| Ignition lock and ignition lock switch |
| Removal |
| 1. |
Place the selector lever in
position P and remove the key.
|
|
| 2. |
Remove the selector lever housing far enough for it to be possible
to turn it to one side, see
.
|
|
| 3. |
Release the connector.
|
|
| 4. |
Remove the ignition lock switch.
|
|
| 5. |
Remove the ignition lock.
|
|
| Fitting |
| 1. |
Fitting is carried out in the
reverse order.
|
|
| 2. |
Check the play in the parking-lock.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
