Cruise control
| Cruise control |
During normal driving the control module sends B+ from pin 9 via the brake pedal switch to the cruise control system.
On changing gear, the circuit is broken and the Cruise Control disconnects if it has been in use.
A feedback circuit is connected between the brake pedal switch and pin 8 of the control module. The Sensonic system obtains information on the position of the brake pedal from this circuit.
During activation of the cruise control system, pin 21 of the Sensonic control module is connected to ground. This function is not used at present by the Sensonic system.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
