Fault diagnosis, ABS lamp not operating
Read the instructions below then start the fault diagnostic procedure.
| Fault diagnosis, ABS lamp not operating |
Fault symptom
The lamp test is carried out when the ignition is switched on. ABS-lamp should be on for approx. 3 seconds. The ABS lamp fails to light.Condition
| • |
Open-circuit in the electrical circuit.
|
|
Diagnostic help
ABS lamp can be activated with the ISAT Scan Tool. Select "ACTIVATE". Select "ABS LAMP".This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
