Wiring diagram, ABS 5.3 (I)
| Wiring diagram, ABS 5.3 (I) |
| Component list |
|
22a
|
Fuse board in main fuse box, dashboard
|
|
29
|
Brake light switch, on brake pedal
|
|
47q
|
ABS Warning lamp in main instrument
|
|
111
|
Electronic speedometer
|
|
342a
|
Fuse board in main fuse box, engine bay
|
|
430
|
TRIONIC control module, on right-hand side behind the side trim below the A-pillar
|
|
445
|
Data Link Connector, 16 pole, CARB
|
|
505
|
MOTRONIC control module M2.10.3, on right-hand side behind the side trim below the A pillar
|
|
507
|
Electronic control module TCS V6
|
|
508
|
Control module, Cruise Control, at far right in engine bay below the windscreen.
|
|
509
|
Saab Sensonic control module, on the bulkhead partition behind the glove box
|
|
510
|
MOTRONIC control module M2.8.1, on right-hand side behind the side trim below the A pillar
|
|
540a
|
Main instrument unit, low specification
|
|
540b
|
Main instrument unit, high specification
|
|
547
|
ABS control module integrated in hydraulic brake unit between the battery and the front main fuse box.
|
|
586
|
Motronic electronic control module 4.1 OBDII
|
|
587
|
Motronic electronic control module 5.2 OBDII
|
|
589
|
Electronic control module, Saab Trionic OBDII
|
|
H6-7
|
6 pole connectors
|
|
H10-2
|
10-pin connectors below the left A-pillar
|
|
H16-1
|
Data link connector under the fascia by the steering column
|
|
H33-2
|
Black 33-pin connector, on the bracket below the left-hand A-pillar
|
|
H33-4
|
33-pin connector, on the bulkhead partition behind the glove box
|
|
G30
|
Grounding point, left-hand structural member behind the battery
|
|
G33S
|
Signal ground connector bracket, below the left-hand A pillar on the connector bracket
|
|
J4
|
Crimp (LHD):Approx. 450 mm from the rheostat towards the main instrument unit (RHD):Approx. 240 mm from the rheostat towards the main instrument unit
|
|
J18
|
Crimp (LHD):Approx. 145 mm from the connector H33-2 (RHD):Approx. 170 mm from the connector H33-2 towards grounding point G33
|
|
J32
|
Crimp (LHD):Approx. 210 mm from the brake light switch towards the rheostat (RHD):Approx. 60 mm from branching rheostat towards the ICE electronic control module (CONV):Approx. 150 mm from branching electrically heated rear window towards the luggage compartment
|
|
J33
|
Crimp (LHD):Approx. 90 mm from the connector H33-3 (RHD):Approx. 450 mm from the connector H33-2 towards the SID
|
|
J49
|
Crimp (LHD):Approx. 390 mm from the rheostat towards the left A-pillar connector bracket (RHD):Approx. 150 mm from SID branching point towards the main instrument unit
|
|
J96
|
Crimp (LHD):Approx. 110 mm from ICE control module branching point towards the brake light switch (RHD):Approx. 290 mm from connector H33-4 towards grounding point G34
|
|
J99
|
Crimp (LHD):Approx. 270 mm from the grounding point G33 towards the ICE control module (RHD):Approx. 340 mm from connector H33-4 towards grounding point G34
|
|
J152
|
Crimp approx. 60 mm from the washer fluid pump branching point towards the main fuse box
|
|
J162
|
Crimp approx. 250 mm from the ABS electronic control module
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
