Track-rod ends
Track-rod ends |
1. |
Slacken the locking bolt slightly.
|
2. |
Slacken the nut slightly.
|
3. |
Use special tool 89 96 696 to press out the track rod end.
|
4. |
Remove the nut.
|
5. |
Measure the length of thread on the adjusting screw.
|
6. |
Unscrew the track-rod end (using an adjustable spanner to hold the adjusting screw).
|
To fit |
1. |
Screw in the track-rod end to the correct thread length on the adjusting screw.
|
2. |
Fit the track-rod end to the MacPherson strut and tighten it, using a torque wrench.
Tightening torque: 60 Nm (44.3 lbf ft).
|
3. |
Tighten the locking bolt, using a torque wrench.
Tightening torque: 22 Nm (16.2 lbf ft). |
4. |
Check the toe-in and adjust as necessary.
|