Knee member, driver
| Knee member, driver |
| To remove |
| 1. |
Dismantle the data link connector located on the lower part of the dashboard on the driver's side (A).
|
|
| 2. |
Remove the lower panel retaining screws and expanding rivets on the front. The expanding rivets are removed by pressing in the centre part of the rivet (B)
|
|
| 3. |
Remove the screws securing the knee member and lift it out, 2 screws (C).
|
|
| To fit |
| 1. |
Fit the knee member in place and tighten the screws, 2 pcs (C).
|
|
| 2. |
Refit the lower panel under the steering wheel (B).
|
|
| 3. |
Refit the data link connector (A).
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
