SAAB WIS ONLINE

B1610

B1610

The SRS control module is programmed incorrectly


Diagnostic procedure


1. Turn on the ignition and clear the diagnostic trouble code. Turn off the ignition and turn it on again, wait for at least 10 seconds with the ignition on.

Check to see if the diagnostic trouble code returns.

If the diagnostic trouble code returns:

Go to point 2.

If the diagnostic trouble code does not return:

No action.

2. Connect the diagnostic tool.


Use the diagnostic tool to see whether the SRS control module is programmed for one or two airbags and compare with the actual number of airbags in the car.

If the number is OK:

If any other diagnostic trouble codes are registered, they should be rectified first.

If no other diagnostic trouble codes are registered, go to section: Procedure for replacing the control module .

If the number is not OK:

Program the correct number of airbags using the diagnostic tool. Programming is done in the “PROGRAMMING” menu on the diagnostic tool.