Diagnostics mode, ACC
| Diagnostics mode, ACC |
A number of the ACC control module's outputs can be controlled ("ACTIVATE") by means of the ISAT. The only condition is that the following two criteria are satisfied:
| • |
Battery voltage must be between 10 and 16 V.
|
|
| • |
Vehicle speed must be 0 km/h.
If either of these criteria is not satisfied, the ACC control module will not execute commands from the ISAT. This will also be indicated by the ISAT. |
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
