Adjusting the boot lid
| Adjusting the boot lid |
The boot lid must be adjusted so that it fits aesthetically against the back of the soft top cover and the side plates, and so that it does not collide with the soft top cover when it is being opened/closed or when the soft top cover is operated.
| A Lengthways and sideways adjustment |
| 1. |
Loosen the nuts holding the boot lid to the hinge.
|
|
| B Height |
| 1. |
Loosen the screws holding the hinge to the side plates.
|
|
| 2. |
Turn the screw that supports the front of the lid when it is closed.
|
|
| C Lock fitting |
Loosen the screws holding the latch fitting and adjust so that the lock works properly.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
