Soft top cover foil seal

To remove

Operate the soft top so that the cover is open (vertical).

Remove the cracked pieces of the foil seal.

Press the foil back into the retainer channel if it has come loose.

To fit

Remove old sealant from the retainer channel.

Fetch Teroson Terodicht (16) 30 15 781 sealant.

Make the opening of the nozzle smaller with adhesive tape so that it is easier to reach the bottom of the channel.

Apply sealant in the bottom of the channel. Start applying the sealant 20 mm from the channel opening and stop 20 mm from the end of the channel.

Fit the new strip. Start and finish 2 mm from the channel opening.