Defroster cover
| Defroster cover |
| To remove |
| 1. |
Pull the A-pillar rubber
mouldings away and remove the pillar trim
(secured by clips).
|
|
| 2. |
Remove the speaker grilles.
|
|
| 3. |
Pull the sun sensor surround slightly rearwards, lift if off and remove it.
|
|
| 4. |
Cars with ACC and/or alarm:
Unplug the
connector for the
sun sensor and/or alarm.
|
|
| 5. |
Remove the retaining nut for the defroster cover and dashboard.
|
|
| 6. |
Lift the rear edge of the defroster cover straight up (secured by clips), move it
sideways to clear the lugs on the dashboard and then lift it away.
|
|
| To fit |
Fit in reverse order.
| Note | ||
|
Make sure that the defroster cover hooks properly into the dashboard lugs. |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
