Cowl, electrically adjustable seat
|
Cowl, electrically adjustable seat
|
Note
|
Removal of the cowl will be facilitated if the seat is moved forward as far as it will go.
|
1.
|
Raise the seat as far as it will go.
|
2.
|
Remove the seat
.
|
3.
|
Remove the switch buttons.
|
4.
|
Remove the screw by the backrest fitting.
|
5.
|
Seat with memory:
Remove the electronic unit so that the screw down in the seat frame by the front edge of the cowl will be accessible,
.
|
7.
|
Remove the screws in the centre and front edge of the seat frame.
|
8.
|
Remove the control unit from the cowl.
|
Fit in reverse order.
Important
|
Make sure that the wiring is fitted in the same position as before, so that it will not be nipped when the seat is adjusted.
|
|