Motor, air pump, lumbar support (357m)
| Motor, air pump, lumbar support (357m) |
| Main task |
To drive the air pump compressor.
| Type |
DC permanent magnet motor that drives a diaphragm compressor. This is used to fill the lumbar support air cushion with air. The compressor comprises a housing with four diaphragm pumps driven by an eccenter on the motor shaft.
| Connect |
The motor pin 3 is powered from fuse 27 in REC via the lumbar support switch (357o) pin 1. Pin 2 on the motor is connected to ground.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
