Brief description

Brief description

•	Switch, lights (10)

•	Switch, hazard flashers (25)

•	Switch, reversing lights (31)

•	Transmission range switch, automatic transmission (245)

•	Brake light switch (29)

•	Underhood Electrical Centre, UEC (342)

•	Rear Electrical Centre, REC (701)

•	Body Control Module, BCM (707)

•	Main instrument unit, MIU (540)/ SID (541)

•	Control module, TCM (502)

•	Column Integration Module, CIM (703a)

The vehicle's exterior lighting system is controlled by the light switch (in the dashboard) and lighting stalk (on steering wheel).

Exterior lighting upon airbag deployment: Hazard warning lights and dipped beam are activated if ACM has deployed the airbag.

The exterior lighting system of the car includes the following light functions:

Headlamps, halogen

Main and dipped beam, tail lights, number plate lighting and parking lights are part of the main lighting. The light switch should be in position 2 and the ignition ON for the main lighting to be active. Main and dipped beam and parking lights are controlled by the fuse box in the engine bay. The dipped beam lamps are supplied with a PWM voltage.

On certain markets, the dipped beam is used as daytime running lights. The light switch must then be in position 0.

Xenon headlamps

Main and dipped beam, tail lights, number plate lighting and parking lights are part of the main lighting. For the headlamps to be active, the light switch must be in position 2 and the ignition must be switched ON. Main/dipped beam and parking lights are controlled by the underhood electrical centre. With dipped beam, the Xenon lamps and parking lights shine. With main beam, the H7 halogen lamp also shines. Once switched on, the Xenon lamp always shines at the same power. For main beam, the shutter is completely down. For dipped beam, the Xenon lamp is partially screened. The halogen lamp and Xenon lamp shine together for main beam.

On certain markets, the dipped beam is used as daytime running lights. The light switch must then be in position 0.

Xenon headlamps (US/CA)

Main and dipped beam, tail lights, number plate lighting and parking lights are part of the main lighting. For the headlamps to be active, the light switch must be in position 2 and the ignition must be switched ON. Main/dipped beam and parking lights are controlled by the underhood electrical centre. With dipped beam, the Xenon lamps and parking lights shine. For main beam, an H7 halogen bulb also shines.

On certain markets, the dipped beam is used as daytime running lights. The light switch must then be in position 0.

Parking lights

The vehicle parking lights consist of front and rear parking lights.

The parking lights can be on by themselves or together with the headlights. The parking lights come on when the light switch is in position 1 if the ignition is off. Depending on the programming alternative, the parking lights are on when the light switch is in other positions. On certain markets, dipped headlights are used for daytime running lights. Side marker lights on certain markers are on at the same time as the parking lights.

5D: The rear parking lights are LED type. The LEDs for the parking lights in the light clusters are common with the brake lights and are powered by the electronic unit in the light cluster.

Brake lights, 4D

Come on when the brake pedal is pressed. The rear electrical unit monitors the circuits to the brake lights and sends error messages to the bus.

The vehicle has a brake light in the right and left lighting clusters and a high-level brake light in the top of the rear screen. The high-level brake light is of the LED type. The brake light bulbs in the light clusters are of the filament type and combined with the parking lights. The brake light bulbs in the light clusters are supplied with a PWM voltage.

If a filament breaks in the lamp which normally serves as a brake light, the function is replaced by the parking light bulb next to it.

Brake lights, 5D

Come on when the brake pedal is pressed. The rear electrical unit monitors the circuits to the brake lights and sends error messages to the bus.

The car has brake lights located in the right and left-hand light clusters plus a high-level brake light at the top of the rear window. The brake lights are LED type. LEDs for the brake lights in the light clusters are common with the parking lights and are powered from an electronic unit in the light cluster.

Reversing lights

The reversing light is placed in the light cluster. The electrical unit in the boot receives a bus message on the current gear and lights the reversing light when reverse gear is selected.

Front fog lights

Two lamps are placed in the spoiler. They are activated by a switch when the light switch is in position 1 or 2 (depending on market). The function is programmable.

The fog light switch is connected to BCM. BCM detects the position of the switch and sends a bus message "Front fog lights, button active ON/OFF", which is used by the main fuse box in the engine bay to control the fog lamps. The lamps are supplied with a PWM voltage.

Rear fog light

There is a lamp on the left-hand side on cars intended for right-hand traffic and on the right-hand side on cars intended for left-hand traffic. The lamp is located in the light cluster housed in the boot lid.

The fog light switch is connected to BCM. BCM detects the position of the switch and sends a bus message "Rear fog light, button active ON/OFF". This bus message is used by the main fuse box in the luggage compartment to control the rear fog light.

Direction indicators

The direction indicator bulbs are placed in the front headlamps, front wings and rear light clusters.

On activation, CIM sends a message to the engine bay and boot electrical unit which control the front and rear direction indicators respectively.

The flash frequency is 90 flashes per minute. If a filament breaks, the flash frequency is increased to 180 flashes per minute.

Hazard warning lights

The warning function when all direction indicators flash is activated by the hazard flasher switch. The switch is located on the ACC unit panel.

Side marker light (US)

The front side marker lights are located in the left and right corners of the front bumper. The LEDs for the rear side marker lights are located in the light clusters in the car body.

The front and rear side marker lights are on with the parking lights.