Amendment toService Manual 6 “Front assembly and steering”
|
SERVICE INFORMATION
|
|
Bulletin Nbr:
|
631-1692 ED. 2
|
|
Date:
...........
|
MAY 1997
|
|
Market:
|
ALL
|
|
|
Amendment to
Service Manual 6 “Front assembly and steering”
|
Some of the dimensions relating to the front assembly have been
changed (see table).
Front-wheel alignment (unladen
car)
Toe-in (measured at wheel rim)
|
mm (in)
|
1.5 ± 0.5 (0.06 ±
0.02)
|
Camber
|
Degrees
(°)
|
-0.8 ± 0.8
|
Castor
|
Degrees
(°)
|
1.95 ± 0.70
(1.60 ± 0.70 between chassis numbers T2000001 and
T2006524)
|
Maximum permissible difference between right-hand and left-
hand castor angle.
|
Degrees (°)
|
0.5
|
Enter the amended figures in the table on page 026-1 of Service
Manual 6 “Front assembly and steering” or refer to this Service Information. This
also applies to Service Manual 0:2 “Technical
data”.
