A-pillar trim, CV |
To remove |
1. | Remove the windscreen frame upper trim . |
2. | Carefully pull the A-pillar trim in the top and bottom edge. |
3. | Cars with microphone: Disconnect the connector from the microphone. |
To fit |
1. | Cars with microphone: Connect the connector to the microphone. Fit the lower section of the trim in the holes in the dashboard.
|
2. | Make sure that the rubber moulding covers the trim. |
3. | Press the trim securely to the A-pillar. |
4. | Check that the rubber moulding is in place. |
5. | Fit the windscreen frame upper trim . |