Main instrument frame |
To remove |
1. | Remove Air vent, panel, driver and Centre air vent, panel |
2. | Remove the radio/navigation unit bolts (A). Raise the unit upwards/outwards. |
3. | Remove the switch panel (A) by pressing the two tabs on the back together and the pressing the switch panel forward starting at its top edge. Unplug the connector (B). |
4. | Adjust the steering wheel so that is as far out and as far down as possible. |
5. | Remove the MIU frame (A). |
To fit |
1. | Fit the MIU frame (A). |
2. | Plug in the connector (B). Fit the switch panel (A) by fitting the catch into its lower edge and then pressing the upper edge into place. |
3. | Fit the radio/navigation unit and its bolts (A). |
4. | Align and fit the Centre air vent, panel and Air vent, panel, driver. |