SAAB Workshop Information System WIS Online saabwisonline.com

Adjust

As part of the pre-delivery service, make the following settings on cars for the SE market. These settings prevent dipped beam and the front fog lights from being on at the same time.

Connect Tech 2 and select F0: Diagnose

Select the model year and car model.

Select F4: All

Select "Most Common Adjustments"

Select "Fog Lights Front"

Press the "Select" button

Select "Pos 1 (and 2 if High Beam) (Special)"

For programming, select OK

Note
If the car is not configured for fog lights but fog lights are installed, the message "Fog lights not installed!" will appear in Tech2.