Front spoiler shield |
To remove |
1. | Raise the car. |
2. | Remove the spoiler shield bolts from underneath.
|
3. | Remove the bolt from the wing liner. |
4. | Pull the spoiler shield rearwards to loosen it.
|
5. | Unplug and remove the connector. Detach the washer hose if required. |
To fit |
1. | Position the spoiler shield over the bottom part of the spoiler. Bend the bottom part of the spoiler slightly. Position the shield and fit the bolts. |
2. | Fit the bumper connector to the holder and, if relevant, the washer hose. Plug in the connector. |
3. | Fit the bolt to the wing liner. |